Back

Brake disc X EBC stainless for Kawasaki KLV 1000 Suzuki DL 650 1000 SV 1000

SKU: MAT-7601420
HAN: GT-912487
Category: brake disc
Manufacturers:

Brake pad Sinter HH EBC

181,20 £

incl. 19% VAT , plus

Available immediately
Delivery time: 4 - 5 Workdays (DE - int. shipments may differ)

Description
Compatible vehicles

Kawasaki KLV 1000 A 2004
Kawasaki KLV 1000 A 2005
Kawasaki KLV 1000 A 2006
Suzuki DL 650 V-Strom 2004
Suzuki DL 650 V-Strom 2005
Suzuki DL 650 V-Strom 2006
Suzuki DL 1000 V-Strom 2002
Suzuki DL 1000 V-Strom 2003
Suzuki DL 1000 V-Strom 2004
Suzuki DL 1000 V-Strom 2005
Suzuki DL 1000 V-Strom 2006
Suzuki DL 1000 V-Strom 2007
Suzuki DL 1000 V-Strom 2008
Suzuki DL 1000 V-Strom 2009
Suzuki DL 1000 V-Strom 2010
Suzuki SV 1000 2003
Suzuki SV 1000 2004
Suzuki SV 1000 2005
Suzuki SV 1000 S 2003
Suzuki SV 1000 S 2004
Suzuki SV 1000 S 2005
Suzuki SV 1000 S2 2003
Suzuki SV 1000 S2 2004
Suzuki SV 1000 S2 2005
Suzuki SV 1000 SZ 2005
Suzuki SV 1000 SZ2 2005
Suzuki SV 1000 U2 2003
Suzuki SV 1000 U2 2004
Suzuki SV 1000 U2 2005

EBC X/XC Series - Full Floating Front Brake Discs

These discs replace many of the LS (Left) / RS (Right) discs and can be fitted on both sides.
The steel used for the new EBC brake discs is a special stainless steel compound with a higher friction effect than that of conventional heat-treated stainless steel brake discs.
With the 10% improvement in friction effect, braking power is increased even further.

The weight of the new ''X'' and ''XC'' series is further reduced by 5-10% due to the 6-rivet system with lightweight inner ring, which is again an improvement over conventional brake discs.
The new brake discs are equipped with EBC's unique and patented SD system, whose square rivets in the recesses of the brake disc allow the outer and inner rings to expand without restriction under the heat generated during braking, without impairing the riveted joint
Such impairment occurs when the brake disc heats up due to heavy braking and the outer ring contacts the (normally round) rivets that separate the outer ring from the inner ring.

The new EBC system prevents this problem, which causes 100% of brake disc defects caused by disc distortion and vibration.

What is the SD system? It is the new square rivet system from EBC. This system completely prevents the brake disc from warping, increases the life of the brake disc and improves the durability of the braking effect.

Top quality - Made in U.K.

Item information	Value
Shipping weight:	0,21 kg
Item weight:	0,01 kg