Back

Brake disc X EBC for Ducati 749 999

SKU: MAT-7600457
HAN: GT-912487
Category: brake disc
Manufacturers:

Brake pad Sinter HH EBC

262,72 $

incl. 19% VAT , plus

Available immediately
Delivery time: 4 - 5 Workdays (DE - int. shipments may differ)

Description
Compatible vehicles

Ducati 749 749 Biposto 2003
Ducati 749 749 Dark 2004
Ducati 749 749 Biposto 2004
Ducati 749 749 Dark 2005
Ducati 749 749 Biposto 2005
Ducati 749 749 Biposto 2006
Ducati 749 749 Dark 2006
Ducati 749 749 Biposto 2007
Ducati 749 749 Dark 2007
Ducati 749 749 R 2004
Ducati 749 749 R 2005
Ducati 749 749 R 2006
Ducati 749 749 R 2007
Ducati 749 749 S Biposto 2003
Ducati 749 749 S Monoposto 2004
Ducati 749 749 S Biposto 2005
Ducati 749 749 S 2007
Ducati 999 999 Monoposto 2003
Ducati 999 999 Monoposto 2004
Ducati 999 999 Biposto 2005
Ducati 999 999 Biposto 2006
Ducati 999 999 R 2003
Ducati 999 999 R 2004
Ducati 999 999 R 2005
Ducati 999 999 R 2006
Ducati 999 999 S Monoposto 2003
Ducati 999 999 S Biposto 2004
Ducati 999 999 S Monoposto 2005
Ducati 999 999 S Monoposto 2006

EBC X/XC Series - Top Quality Full Floating Front Brake Discs

These brake discs replace many of the LS (Left) / RS (Right) brake discs and can be fitted on both sides.

The steel used for the new EBC brake discs is a special stainless steel compound with a higher friction effect than that of conventional heat-treated stainless steel brake discs.
With the 10% improvement in friction effect, braking power is increased even further.
The weight of the new ''X'' and ''XC'' series is further reduced by 5-10% due to the 6-rivet system with lightweight inner ring, which is again an improvement over conventional brake discs.

The new brake discs are equipped with EBC's unique and patented SD system, whose square rivets in the recesses of the brake disc allow the outer and inner rings to expand without restriction under the heat generated during braking, without impairing the riveted joint.
Such degradation occurs when the brake disc heats up from heavy braking and the outer ring contacts the (normally round) rivets that separate the outer ring from the inner ring.
The new EBC system prevents this problem, which causes 100% of brake disc failures due to disc distortion and vibration.

What is the SD system? It is the new square rivet system from EBC. This system completely prevents the brake disc from warping, increases the life of the brake disc and improves the consistency of the braking action.

Item information	Value
Shipping weight:	0,21 kg
Item weight:	0,01 kg